Bosch SHP78CM5N Cycles: What to Choose and How to Save Favorite

Quick answer: The Bosch SHP78CM5N has Heavy, Auto, Normal, Speed60, and Favorite on its control panel. Start with Normal for an ordinary load, Auto when you want sensor adjustment, and Heavy for sturdy items with stubborn food. Favorite saves a cycle-and-option combination; it is not a sixth soil-level program.

Choose a cycle by the dishes

Bosch SHP78CM5N panel cycles and their documented use.
If the load is… Start with…
Everyday mixed dishes with ordinary residue Normal.
Mixed loads where sensors should adapt washing Auto.
Sturdy pots and dishes with stubborn dried or baked-on food Heavy, after confirming items are dishwasher-safe.
An appropriate everyday load when time matters Speed60; Bosch lists a one-hour base cycle.
A combination you want to reuse Favorite, a saved cycle-and-option combination rather than a separate soil-level program.

Selection order: separate fragile or non-dishwasher-safe items; choose the wash program for the food residue; then add only the options that solve a specific need. The shortest cycle name does not describe the complete program.

Save a Favorite on the dishwasher

  1. Switch the dishwasher on.
  2. Select the cycle you want to reuse.
  3. Select the available options you want with it.
  4. Hold Favorite for 3 seconds. The selected combination and Favorite button flash as it is saved.

You can also save a combination through Home Connect. If someone has already configured Favorite, review the stored selection before using it for a special load.

CrystalDry, Sanitize, and PowerControl are options

CrystalDry adds drying time. Sanitize raises and holds temperature longer and can increase run time and energy use. PowerControl directs stronger cleaning to selected lower-rack areas. These are options, not three extra panel cycles.

Place items needing stronger cleaning in the selected area. The manual describes front, back, and custom lower-rack zones configured through Home Connect. Availability depends on the chosen combination.

What Home Connect adds

Bosch’s U.S. sheet lists Delicate, Rinse, and MachineCare as additional app cycles, plus Half Load and Eco options. Look for them in the connected appliance’s current app interface; app presentation and combinations can change. The five panel controls remain available for everyday use.

Do not assume every option works with every cycle. If an option is unavailable, check the selected program and the manual for the full E-Nr. Speed60’s published base time is not a promise that every combination will finish in exactly an hour.

Before you start

  1. Confirm the full E-Nr. on the appliance and use the matching manual.
  2. Choose the cycle from the food residue and item type.
  3. Check the available options for that cycle; then account for added drying, heating, or app settings when planning the finish time.

For cabinet opening and appliance size

Use the SHP78CM5N dimensions and fit guide for cabinet-opening checks.

Official sources and review scope

Source review: October 8, 2026. This guide interprets manufacturer instructions; no hands-on wash-performance testing is claimed. Match the full E-Nr. and current app before following model-specific settings.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *