GE GDF670SYVFS Dimensions: Size and Cabinet-Height Check
Quick answer: GE lists the GDF670SYVFS at 23 3/4 inches wide × 34 inches high × 24 inches deep. Its product table gives a 24 × 24-inch cutout footprint. Opening height needs an extra check: the product table and the installation document currently linked by GE give different height guidance.
GDF670SYVFS measurements
| Measurement or setting | What it means |
|---|---|
| Overall width | 23 3/4 in |
| Overall height | 34 in |
| Overall depth | 24 in |
| Leg-adjustment heights in product table | 33 3/8 in minimum; 34 5/8 in maximum |
| Cutout width × depth in product table | 24 × 24 in |
| Cutout height in product table | 33 1/2 in — see the document discrepancy below before planning an installation. |
Why 33 1/2 inches is not a confirmed fit
The published documents do not agree on opening height. GE’s product table lists a 33 1/2-inch cutout. The installation PDF linked from this model’s Owner Center, document 31-4000322 Rev. 1 (June 2026), describes an approximately 34 1/2-inch opening and specifies a 33 3/4-inch minimum for models with the pan illustrated in that manual.
These are different references, not dimensions to combine or average. Before buying for a tight space, have GE or the installer identify the instructions that apply to the full model on the rating label. A 33 1/2-inch opening should not be approved using this article alone.
The distinction matters most when replacing an older dishwasher under an existing counter. Flooring added after the cabinets were installed can reduce the clear height and create a lip that affects removal as well as installation.
Three checks before delivery
Measure the actual opening
Check width at more than one point and height from the finished floor to the lowest obstruction under the countertop. Record depth without counting space occupied by pipes or fittings.
Check the open door
The closed-appliance depth does not cover an open door, rack access or someone standing at the machine. Check adjacent handles, corners and the aisle in the installation drawing.
Then check the connections. The product page lists 120 V, 60 Hz and 6.6 A. Those appliance ratings alone do not specify the complete branch-circuit installation. Use the applicable installation instructions for the wiring method, water supply and drain arrangement.
If your space is borderline
Send the opening measurements and a rating-label photo to the installer before delivery. Ask for confirmation against the applicable document, particularly if the opening is below the height described in the currently linked instructions. Avoid altering cabinets based only on a retailer’s nominal “24-inch” category.
Need the model’s operating instructions? Go directly to GE’s GDF670SYVFS Owner Center. This guide does not substitute another dishwasher model’s clearances.
Official sources and review scope
- GE GDF670SYVFS product specifications: appliance and cutout values.
- GE model installation page and its linked installation PDF: document 31-4000322 Rev. 1, enclosure guidance on page 3.
Checked October 7, 2026. Manufacturer-document reference, not a hands-on review or installation approval. The height discrepancy is unresolved for an individual appliance; the drawing shows overall size only.